SNK MODEL PM-6B (3) SPINDLE TWIN GANTRY 5 AXIS MILL

 
Buy and Sell CNC Machines in Michigan

Pacific Industries, Inc.

'Specialists In Used Equipment'

Phone: (248) 584-3640    Fax: (248) 584-3641    Web Site: www.pacificind.com

Pacific Industries - Selling CNC Equipment in Detroit Area of Michigan, U.S.A.

Easy to Navigate

Home Page

Find a Machine

Sell Your Machine


SNK MODEL PM-6B (3) SPINDLE TWIN GANTRY 5 AXIS MILL
 
STOCK #111116

CLICK HERE TO PRINT

Click Here to Print

SPECIFICATIONS:

SNK MODEL PM-6B (3) SPINDLE TWIN GANTRY 5 AXIS MILL
Control: Fanuc 15M

New 1999 SNK PM-6B Profiler
Twin Gantry 3 Spindle 5 Axis
7200 RPM
30HP
Cat 50
1440" X Travel
120" Y Travel
32" Z Travel
A + or - 25 Deg.
B + or - 25 Deg.
40" spacing spindle to spindle
Each gantry travels 1164"
Installed new in 2000

Equipped With:

120 FT. BED LENGTH

Bed Surface.............................. 1338" x 120"  (34000mm x 
3050mm)
Distance From Bed to Spindle End ........ 5" - 33"  (127mm - 838.2mm)
Distance Between Spindle Centers......... 40"  (1016mm)
Maximum Work Load........................ 500 Lbs / Foot
Travels - Longitudinal (Gantry) -X Axis.. 85.3'  (26000mm)
Spindle Traverse Y Axis.................. 124"  (3150mm)
Spindle Vertical Z Axis ................. 28"  (711.2mm)
Spindlehead Swivel A Axis............... +/- 25 Degrees
Spindlehead Tilt B Axis................. +/- 25 Degrees
Feed Rates - X- and Y .................. 1mm - 5000mm / Min.
Feed Rate Z ............................ 1mm - 2500mm / Min.
A- and B-Axes:.......................... 0 - 240 Degrees / Min.
Spindle Speeds: ........................ 1000 - 7200 RPM
Spindle Taper:.......................... No. 50 AST
Spindle Motor:.......................... 22 Kw  (30 HP)


Equipped With:

Fanuc 15-MA CNC Controls
Fanuc AC Servo Motors
OilMist Lubrication Unit
Automatic Lubrication for Ways







PRICE....................: ${please call for price}