OKUMA LT-15MY DUAL SPINDLE LATHE WITH LOADING PALLET SYST.

 
Buy and Sell CNC Machines in Michigan

Pacific Industries, Inc.

'Specialists In Used Equipment'

Phone: (248) 584-3640    Fax: (248) 584-3641    Web Site: www.pacificind.com

Pacific Industries - Selling CNC Equipment in Detroit Area of Michigan, U.S.A.

Easy to Navigate

Home Page

Find a Machine

Sell Your Machine


OKUMA LT-15MY DUAL SPINDLE LATHE WITH LOADING PALLET SYST.
 
STOCK #112319

CLICK HERE TO PRINT

Click Here to Print

SPECIFICATIONS:

OKUMA LT15-MY TWIN-SPINDLE CNC TURNING CENTER
w/ LIVE TOOLS & Y AXIS, WITH LOADING PALLET SYSTEM
YEAR 2001

CONTROL: OSP - U100L WITH CYCLE TIME REDUCTION,
ANIMATION, HELICAL CUTTING, & SYNCHRO TAPPING
AUTO MOON ROOF
REAR CHIP CONVEYOR
COORDINATE CONVERSION
C-X CONTOURING
CYCLE TIME REDUCTION
8" KITAGAWA 3-JAW CHUCK FOR SPINDLE 1
ROYAL CDC 60 QCD QUICK CHANGE COLLET CHUCK ON SPINDLE 2
PARTS CATCHER
BAR FEED INTERFACE
SMW SPACESAVER 2100 BAR FEEDER
ROBOT INTERFACE TYPE D
SPINDLE ORIENTATION
11 LIVE TOOL HOLDERS (VDI40) - FACE WORKING IN REFERENCE TO LATHE 
CENTERLINE
NO. OF CONTROLLED AXES: 8
SWING OVER BED: 21.65"
SWING OVER CARRIAGE: 5.91"
DISTANCE BETWEEN CENTERS: 46.46" MAX .... 10.2" MAX                   
                                          MAXIMUM TURNING DIAMETER X 
LENGTH: 8.27" X 7.87"
SPINDLE:
SPINDLE DIAMETER: 3.94"
SPINDLE NOSE TYPE: JIS A2-6
THROUGH SPINDLE HOLE (NOT BAR CAPACITY): 2.44"
NO OF SPINDLE SPEED RANGES: 2 STEPS
SPINDLE SPEED: 75 TO 4500 MIN -1
CROSS SLIDE (X-AXIS)
AXIS TRAVEL: 9.65" UPPER 9.06" LOWER

FEEDRATE: 0.00001 TO 39.37 IPR
RAPID FEEDRATE: 787.40 IPM
CARRIAGE (Z-AXIS)
ZA-AXIS TRAVEL (UPPER TURRET): 18.11"
ZB-AXIS TRAVEL (LOWER TURRET): 35.43"
ZC-AXIS TRAVEL: 18.11"
FEEDRATE: 0.00001 to 39.37 IPM
RAPID FEEDRATE: 944.89 IPM

Y-AXIS (UPPER TURRET)
AXIS TRAVEL: 2.76" + 1.97"
FEEDRATE: 118.11 IPM
RAPID FEEDRATE: 236.22 IPM

C-AXIS (DIRECT CONTROL BY THE BUILT IN MOTOR) (BOTH SPINDLES)
CONTROLLABLE ANGLE: 360 ( 0.001 UNIT)
RAPID FEEDRATE: 200 MIN -1

TURRET (QUICK CHANGE TOOL HOLDER (VDI40) SYNCHRONIZED TAPPING 
POSSIBLE)
TYPE: V12 + V 12
NO. OF TOOLS (ALL LIVE CAPABLE): 12 + 12 (VDI40)
TOOL SIZE: 1" OD TURING TOOLS
11"/2" ID TURNING TOOLS
MOTOR (BUILT IN MOTOR)
SPINDLE DRIVE MOTOR: 20 / 15 HP 20 MIN / CONT
CROSS SLIDE FEED (X-AXIS): XA 5.3 HP
XB 3.3 HP
CARRIAGE FEED (Z-AXIS): 5.3 HP
Y-AXIS: 2.7 HP
C-AXIS: BY SPINDLE DRIVE MOTOR
M-TOOL: 5/3 HP 15 MIN / CONT

MACHINE HEIGHT: 83.27"
NET WEIGHT: 18,700 LBS

PRICE ............. $139,500




PRICE....................: ${please call for price}